Metal, mineral and ceramic surfaces require preparation before applying a high-quality coating system.
Recoat Bonding Agent is an adhesion enhancer for various substrates. It increases the bonding surface of the substrate.
Recoat Bonding Agent is ideally suited to improve adhesion on steel, stainless steel, aluminium, zinc, galvanised and mineral substrates and ceramics.
Dilute Recoat Bonding Agent standard 1:1 with water. Apply Recoat Bonding Agent evenly over the surface with a cleaning mop and then allow to dry.
| Volume | |
|---|---|
| Base | Water-based adhesion promoter |
| Colour | Colourless |
| Mix ratio | 1 : 1 |
| Output | Approx. 15 m2 – 20 m2 / liter |
| Gloss strength | GU |
| Application by means of | Mop, Sponge |
| VOC content | 0 g/L This product is suitable for indoor and outdoor use. |
| Approximate specific density | 0,97 KG/l |
| Application | Wear gloves and ensure sufficient ventilation |
| Cleaning materials | Water |
| Transport | Temperature during storage, transport and application minimum 5° C and maximum 30°C at a relative humidity of Maximum 85% |
| Storage stability | Unopened a maximum of two years in case of dry, cool and frost-free storage. |
Schaafdries 12
5371 NJ Ravenstein
Nederland
SDS - EN - Recoat - Bonding Agent