Remove lose dust/grit with a vacuum cleaner, floor mop or other dry cleaning method.
Pretreatment before coating:
Depending on the level of contamination the Recoat Floor Cleaner can be diluted from 1:5 (standard) for normal cleaning, to 1:2 (1 litre cleaner to 2 litres of water) for deep cleaning.
Apply the diluted Recoat Floor Cleaner on a section of the floor by spray or mop.
Leave the solution on the substrate for 3-5 minutes to solve the embedded contamination. Scrub the treated section with a polishing machine or auto scrubber equipped with a white or red pad and remove all the dissolved contamination. When the entire floor is cleaned like this make one more overall run with the auto scrubber holding only clean water in the tank making sure to remove all cleaning residues.
Note: keep the quantity of water used for cleaning to a minimum. Be aware of large openings/crevices in the floor. Do not allow excessive amounts of cleaning solution in to run in the openings/crevices .
Note: when using the Recoat Floor Cleaner in high concentrations allow 2-3 hours drying time before using the floor.
For regular floor cleaning:
Dilute Floor Cleaner 1:50 to 1:100
Assessment of the surface is very important. The surface must clean, dry and free of grease, oil and other contaminants.
– First clean prefab concrete with the Recoat Etching Cleaner (see-TDS). For untreated and highly absorbent substrates depending on the suction, dilute the primer strongly (20-50%) with water.
– First clean ceramic surfaces with a sanding cloth in combination with the Recoat Bonding Cleaner (see TDS).
– First clean plastic surfaces with a sanding cloth in combination with the Recoat Cleaner.
– Metal (closed) surfaces first clean a sanding cloth in combination with the Recoat Bonding Cleaner (see TDS).
– Other surfaces first clean a sanding cloth in combination with the Recoat Cleaner.
Recoat Multi Primer reduces consumption and ensures optimum performance of the end product. Apply product as a “normal” waterborne paint; applying, distributing and holding off. Avoid working in the sun because of too fast drying.
Never apply Recoat products undiluted.
Advice to always make a test surface.
Assessment of the surface is very important. The surface must clean, dry and free of grease, oil and other contaminants.
– First clean concrete substrates such as prefab concrete and other absorbent substrates with the Recoat Etching Cleaner (see TDS)
For untreated and highly absorbent substrates depending on the suction, dilute the primer strongly (20-50%) with water.
– First clean plastic surfaces with a sanding cloth in combination with the Recoat Cleaner.
– Metal (closed) surfaces first clean a sanding cloth in combination with the Recoat Bonding Agent. (see TDS)
– Other surfaces first clean a sanding cloth in combination with the Recoat Cleaner.Recoat Multi Primer reduces consumption and ensures optimum performance of the end product. Always use the wet-on-wet approach.
Apply the product, distribute evenly and leave alone. Avoid working in the sun because of too fast drying.Never apply Recoat products undiluted.
Advice to always make a test surface and to prepare with Recoat Multi primer.
The finishing coat must be applied no later than 48 hours after the application of the first layer.
Recoat Floor is an extremely durable and abrasion-resistant clear matt anti-slip coating designed for the most demanding environments. This coating is ideally suited for floors of railway stations, airports and other high-traffic locations, thanks to its unique ability to prevent chewing gum from adhering.
With a very high anti-slip rating of R12, Recoat Floor offers optimum safety for both indoor and outdoor applications. It is suitable for almost all surfaces where a high anti-slip value is required, and is particularly effective in wet areas such as shower rooms in sports centres and toilet groups.
Choose Recoat Floor and invest in a safe, durable and low-maintenance flooring solution that meets the highest standards!
| Location | Inside, Outside |
|---|---|
| Surface | Concrete, Linoleum, Mineral floors, Plastic, Terrazzo, Tiles |
| Special features | Against human excrement, Anti-Chewing Gum, Anti-Slip, Busy traffic area + 10,000 movements per day, Chemical resistant, Preventing urine stains /odor nuisance, Resistant to iodine / blood / disinfectants |
| Finishing | Matt |
SDS - EN - Recoat - Floor Cleaner
TDS - EN - Recoat - Floor Cleaner SDS - EN - Recoat - Multi Primer
TDS - EN - Recoat - Multi Primer
Tests Multi Primer
Recoat Product Comparison SDS - EN - Recoat - Floor
TDS - EN - Recoat - Floor
Product Fire Classification Recoat 2K products
Recoat Product Comparison
Tests Recoat Floor
QUV test Report 2K products
Recoat Floor SBI test
Recoat Floor Slip test
Warrington Fire Smoke Tests
Schaafdries 12
5371 NJ Ravenstein
Nederland
