Remove lose dust/grit with a vacuum cleaner, floor mop or other dry cleaning method.
Pretreatment before coating:
Depending on the level of contamination the Recoat Floor Cleaner can be diluted from 1:5 (standard) for normal cleaning, to 1:2 (1 litre cleaner to 2 litres of water) for deep cleaning.
Apply the diluted Recoat Floor Cleaner on a section of the floor by spray or mop.
Leave the solution on the substrate for 3-5 minutes to solve the embedded contamination. Scrub the treated section with a polishing machine or auto scrubber equipped with a white or red pad and remove all the dissolved contamination. When the entire floor is cleaned like this make one more overall run with the auto scrubber holding only clean water in the tank making sure to remove all cleaning residues.
Note: keep the quantity of water used for cleaning to a minimum. Be aware of large openings/crevices in the floor. Do not allow excessive amounts of cleaning solution in to run in the openings/crevices .
Note: when using the Recoat Floor Cleaner in high concentrations allow 2-3 hours drying time before using the floor.
For regular floor cleaning:
Dilute Floor Cleaner 1:50 to 1:100
The assessment of the substrate is very important. The surface should be clean, dry and load-bearing, free from skin grease, oil, etc.
Clean the surface with Recoat Floor Cleaner.
Then pre-treat the surface with Recoat Stix UV and after drying apply Recoat Floor UV with a microfibre roller 8-9 mm.
(See TDS sheets for products)
After drying, the Floor UV coating can be cured with a UV lamp.
Drying can be accelerated by using fans (1/2 hour).
Always make sure to work wet in wet. Apply the product like a ‘normal’ water-based paint; apply, distribute and keep off. Avoid working in the sun because of too fast drying. Do not apply thick layers!
Recoat Floor UV is a pioneering coating system designed for optimum performance and ease of use. This innovative floor coating is quick to apply and can be used immediately after UV curing, making it the perfect solution for busy environments where downtime needs to be minimised.
Choose Recoat Floor UV and experience the benefits of a fast and efficient curing system that not only ensures a safe and durable floor, but also contributes to a pleasant working environment without odour nuisance. Perfect for professional applications where time and quality go hand in hand!
| Location | Inside |
|---|---|
| Surface | Rubber, Concrete, Linoleum, Mineral floors, Plastic, Terrazzo, Tiles, Wood |
| Special features | Low odour, Resistant to plasticisers, Anti-Slip, Chemical resistant |
| Finishing | Silk |
SDS - EN - Recoat - Floor Cleaner
TDS - EN - Recoat - Floor Cleaner SDS - EN - Recoat - Stix UV
TDS - EN - Recoat - Stix UV SDS - EN - Recoat - Floor UV
TDS - EN - Recoat - Floor UV
Schaafdries 12
5371 NJ Ravenstein
Nederland
